Glory Polyurethane Wood Seal


Glory Polyurethane Wood Seal varnish clear is a high quality single component varnish available in gloss and matt finish. Glory polyurethane is suitable for direct application on the following surfaces;
• Softwood
• Hardwood
• Doors
• Furniture
• Handrails
• Counters
Application of matt polyurethane varnish should be restricted to interior surfaces and is not recommended for application as a floor finish.


• Gives a tough clear finish
• Good abrasion resistance
• Good adhesion

• Economical
• Easy to apply
Surface Preparation

Sand down to smooth surface and dust off. Stain the surface if necessary by use of Glory natural Timbatone. For a superfine finish, apply two coats of glory sanding sealer, rub down with fine sand paper to an ultra smooth base.


Apply by brush or spray.


Thin to the desired application viscosity with glory white spirit or mineral turpentine.


Covers 12-14 square metres on smooth non-porous surface.

Drying Time

Touch dry in 3 to 4 hours, recoatable overnight.

Equipment Cleaner

Glory white spirit or mineral turpentine.

Packing Sizes

1 liter and 4 liter.


Store in a cool, dry and well ventilated place.

Health & Safety

• Flammable, keep away from sources of ignition.
• Use in a well ventilated area.
• Avoid smoking when working on material.

Disclaimer: Statements and recommendations made herein are based on tests believed to be reliable. However, no guarantee for their accuracy or completeness is made. Products are sold without warranties or conditions expressed or implied. Purchasers must make their own test to determine the suitability of our products for their particular purposes.