Glory Galvanised Emulsion Paint


Glory Galvanised Emulsion Paint is a high performance pure acrylic based paint recommended for application on interior and exterior surfaces. It can be applied on aluminum, steel, galvanized iron, concrete and masonry surfaces after the necessary surface preparation and appropriate primer application.


• Very good stability
• Very good opacity
• Fast drying
• Washable, scrub resistant
• Very good durability
• Easy to use
• Economical

Surface Preparation

The surfaces to be painted must be clean and in good condition, free of any oil, grease and dirt etc. Metallic surfaces should be treated with Glory acid wash to facilitate primer adhesion. Apply one fair coat of Glory 2 Pack Epoxy H/B Primer Yellow or Glory 2 Pack Acrylic Primer Beige followed by one coat of Glory Galvanised Primer/Undercoat.


Apply 2 to 3 coats of Glory Galvanized Emulsion at 3 to 4 hours interval by brush, roller or spray.


Thin with clean, fresh water. Avoid over thinning.


10 to 12 Square meters per feet on smooth, non-porous surfaces.

Drying Time

Normally dry and recoatable in 3 to 4 hours depending on atmospheric condition.

Colour Range

Available in white and red.


Wash equipment with clean water immediately after use.

Packing Sizes

4 liter and 20 liter.


Keep in a cool, dry and well-ventilated area.

Health & Safety

• Ensure good ventilation during application.
• If splashes enter eyes, wash with plenty of water.
• Wash from skin with soap and water.
• Keep out of reach of children.

Disclaimer: Statements and recommendations made herein are based on tests believed to be reliable. However, no guarantee for their accuracy or completeness is made. Products are sold without warranties or conditions expressed or implied. Purchasers must make their own test to determine the suitability of our products for their particular purposes.