Glory 2 Pack Etching Primer


A two component primer based on vinyl resins designed to provide maximum adhesion to metal surfaces. It contains a corrosion resistance pigment and can be applied to both ferrous and non-ferrous surfaces. It is particularly recommended for use on aluminium, aluminium alloys and fibre glass.

Surface Preparation

Render the surface free of rust, dirt, oil, grease and any surface contaminant. Ensure the surface is dry before painting commences.


Mix the Etch primer base with Etch primer activator at a ratio of 1:1. Leave to stand for 10 to 15 minutes. Mix just enough to use at one given time as any unused material will harden.


Apply by spray ensuring that only a thin coat is applied. Ensure that surface is well covered as any exposed areas will compromise subsequent coat adhesion. Make no attempt to obliterate the surface. Heavy coat application reduce adhesion.

Drying Time

5 to 10 minutes. Recoatable after 30 minutes.


Store in a cool, dry and well ventilated place away from any possible sources of ignition.

Health & Safety

• Flammable, keep away from sources of ignition.
• Corrosive - activator is acidic, handle with care, wear suitable protective clothing.
• Do not smoke when working on material.
• Keep out of reach of children.

Disclaimer: statements and recommendations made herein are based on tests believed to be reliable. However, no guarantee for their accuracy or completeness is made. Products are sold without warranties or conditions expressed or implied. Purchasers must make their own test to determine the suitability of our products for their particular purposes.