Glory Synthetic Fast Dry Enamel


Glory Synthetic Fast Dry Enamel cures to a hard film with good adhesion and abrasion resistance good covering power. Excellent film build.


High quality modified alkyd resin, blended with quality pigments.

Surface Preparation

Proper care and attention to the preparation of the surface before application will adds life and appearance to the final finish. Where the condition of the existing surface is suspect, it should be stripped to bare metal. All surfaces must be clean, dry and free from flaking paint, rust or oil.


Glory Synthetic Fast Dry Enamel can be applied by brush or spray. Light coats are recommended which should be allowed to flash off before applying further coats. Too heavy a coat in one application will result in sagging.


Thin to spray viscosity thinning use white spirit, Universal standard thinner or high gloss thinner.

Health & Safety

• Flammable, keep away from sources of ignition.
• Use in a well ventilated area.
• Do not breath vapour/spray.
• In case of contact with eyes, rinse with plenty of water.

Physical Data

Specific Gravity 1.1 kg./1
Viscosity 120 s B4-25' C
Drying Time Touch dry 1 hour. Hard dry 12 hours.
Colour Fastnes UV Stable

Disclaimer: Statements and recommendations made herein are based on tests believed to be reliable. However, no guarantee for their accuracy or completeness is made. Products are sold without warranties or conditions expressed or implied. Purchasers must make their own test to determine the suitability of our products for their particular purposes.