Glory Nitrocellulose Enamel


Glory Nitrocellulose Enamel is quality auto refinish paint based on a blend of a quality synthetic resin and nitrocellulose. It's a high build fast drying material with a good gloss and an elastic film.


• Hi build
• Fast drying
• Good gloss
• Elastic film
• Economical

Surface Preparation

Remove all old paint by use of glory paint remover or mechanical abrasion. Remove any traces of rust with glory rust remover and rinse thoroughly with clean water. Prime bare surfaces with glory etch primer mixed at a 1/1 ratio with etch primer activator. Apply 2 to 3 coats of glory nitrocellulose primer and sand smooth. Fill minor imperfections with glory spot putty. Sand with fine emery paper.


Apply 2 to 3 coats by spray.


Thin to spray viscosity with glory cellulose enamel thinners. For maximum gloss, thin final coat with high gloss thinner.


Covers 6 to 8 square meters by spray application.

Drying Time

Touch dry in 10 to 30 minutes. Recoatable within 30 minutes to 1 hour.

Equipment Cleaner

Clean equipment with standard or high gloss thinner.

Packing Sizes

1/2 liter, 1 liter and 4 liter.


Store in a cool, dry and well ventilated place.

Health & Safety

• Flammable, keep away from sources of ignition.
• Use in a well ventilated area.
• Avoid smoking when working on.
• Keep out of reach of children.

Disclaimer: Statements and recommendations made herein are based on tests believed to be reliable. However, no guarantee for their accuracy or completeness is made. Products are sold without warranties or conditions expressed or implied. Purchasers must make their own tests to determine the suitability of our products for their particular purposes.